Firmware ScoopyFlex

New features :

• Added support for the editing feature.

Improvements :

• In the status bar, networks labels are replaced by networks icons.
• Ability to get the battery temperature in the “Status > Battery” menu of the front panel.

Fixed issues :

• Audio snapshot issue: “Mic/Line PAD” is not handled for “MIC A” and “MIC B”.
• Audio noise when scrolling in the menu of the front panel.

New features :

• Added support for the USB audio interface (ScoopyFlex is seen as a sound card for a PC).

Improvements :

• Decrease of the audio latency.
• Ability to mute all microphone inputs through a “Softkey”.

Fixed issues :

• The default “Time zone” is now set to UTC.
• Wrong “Softkeys” behavior.

New features :

• Ability to configure a “Time zone” from the “Tools > Miscellaneous” menu of the front panel.
• Added support for the disks (Internal, SDCard, USB) manager tools (format, repair, eject…) from the “Media” page of the front panel.
• Ability to configure the “Softkeys” (F1-F4 keys and TBA-TBB Talkback keys) from the “Tools > Softkeys” menu of the front panel (intercom, talkback, shortcuts functions…).

Improvements :

• Extension of the microphones input gain ranges accessible from the “Audio” page of the front panel and the “Audio” page of the html interface.
• Ability to set on/off each microphone from the “Audio” settings page of the front panel.
• Added MIC1 & MIC2 status in the status bar of the front panel.
• Ability to individually route each channel (L/R) of the “Stream” and the “Player” to the “LINE/USB” outputs from the “Mixer” page of the front panel.
• Ability to individually route each channel (L/R) of the “Stream” and the “Player” to the “AES67” outputs from the “Mixer” page of the front panel.

Fixed issues :

• The clock source setting for an AES67 Dante board was not correct.
• The fan control was not correctly managed in some condition.
• The AES67 was not correctly managed in some condition.
• Setting the Mic input phantom power from the “Audio” page of the html interface does not work.
• On the “Mixer” monitoring page of the front panel, wrong initial settings (L + R) for the “Streams” monitoring introducing a 6dB gain (TV mode).
• If there is no network connection on an Ethernet interface, deactivating “DHCP” mode from the “Network > LAN settings” menu of the front panel, fails with the message “Failed to apply changes!”.

Improvements :

• Management of the recording led (REC).
• Management of the AES67 state (active / inactive) and the clock source.
• Ability to disable the Wi-Fi network scan, from the “Network > Wi-Fi settings” menu of the control panel.
• Unmount external devices connected (SD card, USB stick) when powering off or rebooting the unit.

Fixed issues :

• MIC1 and MIC2 inputs gain may be incorrect at startup.
• On the control panel, the AES67 – RAVENNA inputs 7 & 8 are not correctly managed, from the “Audio > AES67 > RAVENNA > Input Stream” menu.

New features :

• Added support for the recording and playback functionalities.

Improvements :

• On the control panel, display of the second Ethernet interface status (docking station) in the status bar.

Fixed issues :

• MICA and MICB (docking station) analog input gain range is limited to 0db/+16dB instead of -26dB/+16dB and not correctly handled through the physical potentiometer, in LINE mode.

New features :

• Ability to support a docking station.

Fixed issues:

• If the “Auto Operator Login” is active, the status bar is not displayed on the control panel.

Fixed issues:

• Although the “Remote Access” is in the status “Connection Established”, the “Remote Access Client” portal (https://cloud.aeta.com/rac) is not reachable.

New features :

• Added the “AUDIO” page on the html interface.

First version

Not released