• English
  • French

SCOOPY+ Last Firmware Release

Before proceeding with the update, please read carefully these important instructions.

If the Scoopy+ has a firmware older than version 2.0, to be updated the unit must be returned to our factoryPlease contact the sales service for such case.

If the firmware is 2.0 or newer, but older than 2.2, you must download this preliminary update file.

If the firmware is 2.2 or newer, see the firmware revision history below and download the file for updating the firmware.

(For Japanese mobile networks, only version V3.01.02 must be used : see below)

Firmware revision history (click a version for details)

Version 3.05

Version 3.05

Released 2017/08/08            Click here to download the update file
Not suitable for Japanese mobile networks, please use version 3.01.02.

Web pages security improvements :

  • Implementation of HTTPS for the embedded server.
  • Enhanced protection against attacks.
  • Implemented a technique to prevent from Cross-Site Request Forgery attacks.

Improvements :

  • When importing a configuration file, the login password is not affected (previously, the password possibly included in the configuration file was also imported).

Fixed issues :

  • Fixed various malfunctions in the handling of presets (create/update/load), in some cases imposing to reboot the unit.

Important notice: if a password is set for accessing the html pages, you MUST reset it to a blank value (refer to page Maintenance/Login data), BEFORE performing this firmware update.
Once the update is completed, you can later set a password again.

Version 3.03

Version 3.03

Released 2016/02/22            Click here to download the update file
Not suitable for Japanese mobile networks, please use version 3.01.02.

Improvements :

  • For mobile IP data, improved handling of data connection issues (failure to establish a connection, unexpected data disconnection, connection retry process).
  • Improved stability of the starting process when there is no IP network connectivity
  • On html page, parameters related to mobile data (data activation, APN, network quality..) are now accessible even if the current mobile mode is "Voice"
  • Screen saver period reduced to 5 s.

Fixed issues :

  • Low resilience to IP packet losses for G711, G722 and MPEG L2 : fixed.
  • Selection of IP or voice mode for mobile network in remote profiles.
Version 3.02.02

Version 3.02.02

Released 2015/10/22.
Not suitable for Japanese mobile networks, please use version 3.01.02.

Improvements:

  • Better handling of mobile data connections; better error detection (failure to connect or unexpected disconnection) and improved retry process.
Version 3.02.01

Version 3.02.01

Released 2015/07/02.
Not suitable for Japanese mobile networks, please use version 3.01.02.

New features :

  • Ethernet connection status is displayed on the main front panel screen
  • SIP registration status is displayed on main front panel screen
  • New handling of mobile data service: data on/off setting, with auto reconnection at startup if data is set on.
    (Data off : avoids undesired data consumption, for instance if only HD voice is desired)
  • Support for the Hughes HNS9450 BGAN terminal

Improvements :

  • Improved jitter buffer handling: lower latency, better resilience to packet losses.
  • Status of mobile data connection displayed on html page.
  • Added a confirmation for stopping a recording (press STOP key twice).
  • Wider setting range for the level display headroom.

Fixed issues :

  • Unexpected interruption of the recording, happening sometimes after a variable duration.
  • Level too low when playing back an audio file during mobile transmission: fixed.
  • Packet replication with BGAN transmission: issue fixed.
  • Display issues with high number of stored profiles (front panel and html pages): fixed. 
  • Miscellaneous text amendments on html pages.
Version 3.01.02

Version 3.01.02

Released 2014/09/16
This version is recommended for Japanese mobile networks (download here).

Improvements:

  • Added a variation of the LTE/4G USB module Huawei 3276, not supported so far.


Fixed issues :

  • Depending on the coding configuration, the activity on the screen could induce jitter in the transmitted IP audio stream.
Version 3.01.01

Version 3.01.01

Released 2014/06/06

Fixed issues :

  • Fixed: at the beginning of a stereo link with an AAC coding, the encoder often swapped the left and right channels.
  • In some situations, with mobile voice transmission, the device could miss a network originated event. As a consequence, for instance, it could happen that after a remote release of a mobile voice call it was not possible to regain control on the line.
  • Fixed: POTS hybrid transmission defective on version 3.01.

  

Version 3.01

Version 3.01

Released 2014/05/12

New features :

  • During a link (mono), ability to record both the transmitted program and the return signal. The two signals are recorded separately as two channels of a wav file.

Improvements :

  • Reception buffer (IP mode): improved jitter tolerance.
  • Faster synchronization for G722 SRT (ISDN), even without an audio signal.
  • Relay state transmission : periodic refresh for higher resilience to packet losses.
  • Miscellaneous edits for texts in the menus and HTML pages.
  • New function in menu to clear the history of calls.
  • New function in menu to clear the history of coding configurations.
  • Added the "5AS" checkbox in the ISDN configuration menu.
  • The sub-menu related to the relay extension is no more displayed when there is no such device on the USB interface. 

Fixed issues :

  • Fixed: in IP mode, abnormal latency build-up when the link is highly disturbed by losses and excess jitter.
  • Fixed: in the fields of an HTML page, entering special characters could lead to freezing the page.
  • Fixed: repeated calls to a wrong ISDN number could lock the unit.
  • Fixed: test loops that are not available for the current network interface are no more proposed in the menu.

  

Version 3.00.02

Version 3.00.02

Version 3.00.02

Edition 2014/01/14

Fixed issues :

  • Fixed:  outgoing mobile voice calls fail on units with Siemens HC25 module.

Version 3.00.01

Released 2013/12/02

Various fixes and improvements.

Improvements :

  • During a connection with relay transmission, ability to show on the LCD the current state of the info transmitted by the Scoopy+.

Fixed issues :

  • Fixed: outgoing call on coordination channel not accessible.
  • Fixed: auto redial after restart while the call has been previously released on purpose.
  • Fixed: missing information on the radio access technology (2G/3G), when using some types of SIM cards.

  

Version 3.00

Version 3.00

Released 2013/10/08
Numerous fixes and improvements.

New features :

  • PIN code memorization for the SIM card ("wireless" option).
  • Multicast IP transmission.
  • Support for Huawei E3276 LTE USB device

Improvements :

  • Faster synchronisation with 4SB ADPCM
  • Settings added on html interface: IP Network Quality, TOS, MAC address.
  • More flexibility for "network quality" settings, with the addition of settings with a bigger jitter buffer (suitable for very poor network conditions, 3G/4G networks...).
  • Less "verbose" modes for the history file
  • Possibility to use an NTP server for time stamping the events in the history file.
  • Miscellaneous edits on displayed texts.

Fixed issues :

  • Data channel could not be set/read at 9600 bauds from html interface.
  • Fixed: on the mobile interface, a waiting call would drop the current connection.
  • Periodic [low level] noises in ISDN mode with G711/G722 coding.

  

Version 2.3.4

Version 2.3.4

Released 2013/07/25

Improvements :

  • Fixed: recording was lost if shutting off the unit immediately after stopping the recording.
  • Fixed for mobile or BGAN modes: to avoid connection failures, increase the time left between registration and SIP call, between SIP release and data service disconnection.
  • Fixed: "BGAN detection" parameter now included in the local profile.
Version 2.3.3

Version 2.3.3

Released 2013/07/23

Improvements :

  • Default APN table edited to improve LTE compatibility
  • Fixed: if selecting "#" key from the root menu, the LCD goes off.
  • Fixed:"NI1" protocol setting was in fact ETSI/Euro ISDN
  • Fixed: issues when two units are connected on the same ISDN line.
  • Fixed: BGAN detection inoperative.
Version 2.3.2

Version 2.3.2

Released 2012/09/13

< BACK